How to Make Hair Cream- Prorsol

INGREDIENTS

1. Paraffin oil

2. Petrolatum

3. Paraffin wax

4. Lanolin

5. Mustard seed oil

6. Coconut oil

7. Glycerin

8. Menthol

9. Sulfur

10. Preservative

11. Color ( Optional)

12. Lavender oil

PREPARATION

1. Pour paraffin oil into a dry clean utensil and apply heat.

2. Add petrolatum and keep stirring until it completely melts.

3. Add paraffin wax and continue cooking until it melts completely.

4. Add Lanolin oil and stir with a long metal spoon until melted

5. Add coconut oil or olive oil, to the mixture

6. Add mustard seed oil

7. Add menthol

8. Add glycerin

9. Add sulphur

10. Remove from heat and

add preservative

11. Add color

12. Add lavender fragrance

13. Set the plastic jars

on a flat surface

14. Pour molten hair cream

into sterile plastic jars.

15. Cover and let stand for about two hours to solidify, and then cover tightly.

16. Store in a cool dry place.

FAQs

Question: Why use preservatives when there is no water?

Answer: Yes, water-based products require large amounts of preservatives. Hair care products break down over time, and most ingredients are water-soluble. We used preservatives because anhydrous hair cream products can be unknowingly exposed to moisture penetration. Preservatives help prevent contamination if exposed due to improper storage.

Comments

(DIY) How to Make Powder Laundry Detergent- prorsol

Detergent is a water-soluble cleansing agent that makes impuritbabyd dirt in clothing more soluble in water. All detergents are made principally of caustic soda and other ingredients such as distilled water, hydrogen peroxide, sulphonic acid or concentrated hydrochloric acid, fragrance oil, palm kernel oil, thick ash, and dye. However, fragrance and dye-free detergents are best for baby laundry and those with allergies or sensitive skin. To make about 10 kg of powder detergent you will need the following ingredients: 1.8kg distilled water 750mls(0.75kg) hydrogen peroxide 375 mls (0.37kg) sulphonic acid or HCL 100 mls (0.10kg) Tea tree oil 2250 MLS (2.25kg)Palm kernel oil 1kg caustic soda 3kg light soda ash 0.1kg dried bleach sediments Color ( optional) Note: Always use a container that is double the size of the volume you want to make to avoid spillage. 1. Part 1 of 4 Preparation of caustic soda salt solution 1. Put on all protective gear. 2. Pour 3 beer bottles

(DIY) How to Make Bath Bar Soap- Prorsol

I ngredients: Palm kernel oil Caustic soda Foaming agent Hardener Sodium silicate Glycerin Vitamin E Tea tree oil Colorant Fragrance oil Water 1. Part 1 of 6 Reconstitution of caustic soda salt 1. Put on all protective gears. 2. Pour 1059mls distilled water into a heat resistant plastic basin 3. Add caustic soda into the water and stir. You will notice that the solution becomes hot and irritating. Be careful! Set aside for a day out of reach of children. Note: Be warned that water added to lye is corrosive. Only add lye to water. 2. Part 2 of 6 Mixing of PKO and cooled caustic soda solution 1. To the cooled overnight caustic soda solution pour palm kernel oil and stir. 3. Part 3 of 6 Adding of foaming agent, hardener and sodium silicate to the rest of the ingredients 1. Add foaming agent and continue stiring. 2. Add hardener and keep on stiring 3. Add sodium silicate and stir 4. Part 4 of 6 Adding of Glycerine and Vitamin E 1. Add Glycerin to the mixture and stir 2. Add Vitamin

(DIY) How to Make Liquid Soap With PAC-R- prorsol

Liquid soap is soap in liquid form. It is a cleansing agent made from a highly-foaming combination of surfactants. To make 20 liters volume you will need the following Ingredients: PAC-R Sulphonic acid formalin or Sodium benzoate salt lemon essential oil(optional) green colorant soda ash SLS or SLES Water PROCEDURE PART 1 of 5 Preparing the PAC-R and Distilled Water Mixture. 1. Put on all protective gear, including gloves and face mask. 2. In a plastic container soak 2 cups of PAC-R in 5 liters of water and set aside for 2-3 days to completely soluble. PART 2 of 5 Preparing the Light Soda Ash solution and adding it to Sulfonic Acid 1. In a medium-sized basin pour about 4 litres of water, and add 2 cups of light soda ash. mix until completely dissolved. 2. Then slowly add the light soda ash solution to sulfonic acid, stirring continuously using a stick or stainless steel hand blender to give you a creamy paste. PART 3 of 5 Preparing the Sodium Lauryl Sulphate solution and combi

Prorsol

Search This Blog